A black patch that spreads across a MacBook screen is damage inside the screen. It is not a software fault. This is a MacBook Air M2 job from Kellyville, with what I found, what I did and what it cost.
What does this kind of screen damage look like?
These signs showed up in the job below.
- A small dark patch near the edge of the screen.
- The patch got bigger over the next two days.
- Several coloured lines ran across the screen.
The dark patch looked like ink bleeding under the glass.
What caused it?
The MacBook had been carried in a backpack with several books. The owner thought the books had pressed on the lid. What I found matched that. The layers inside the screen had been damaged by pressure. The black area was liquid crystal that had leaked inside the panel.
Is the fault in the screen or the logic board?
There is a simple test. Plug the MacBook into another monitor or a TV. If the picture there is normal, the fault is in the MacBook’s own screen. The logic board is the main circuit board that runs the Mac.
In this job the picture on a second monitor was normal. That showed the fault was in the screen alone.
What does a real screen repair look like?
This is a job I did on a MacBook Air from Kellyville.
| Model | MacBook Air 13.6-inch M2 (A2681, 2022) |
| Where | Kellyville, NSW 2155 |
| What happened | Carried in a backpack with several books. A small dark patch showed near the edge of the screen. Over the next two days it got bigger and lines ran across the screen. |
| What I found | Pressure damage to the layers inside the screen. The lid was straight, the hinges worked and the camera was fine. The picture on a second monitor was normal. |
| What I did | Took out the damaged 13.6-inch LCD panel and kept the original aluminium lid and display electronics. Cleaned the bonding area, fitted a new Liquid Retina LCD panel and put the display back together. The original camera and its cables stayed in place. |
| Result | A clear screen with no lines or dark patches. True Tone still worked. |
| Time | 2 working days |
| Cost | $525 |
Why was only the panel replaced?
The lid was straight, the hinges worked and the camera was fine. So the original aluminium lid, the display electronics and the camera all stayed. Only the damaged LCD panel was taken out and replaced.
True Tone kept working after the repair.
What made this repair hard?
The M2 MacBook Air has a thin display with very little room around the edges of the panel. Extra care was needed around the camera cut-out and the fine connections at the bottom of the display. The new panel also had to be lined up so it sat evenly in the original lid.
What was tested before it went back?
- True Tone
- Brightness
- The camera
- Closing the lid
- Sleep
All of them passed.
What did it cost?
This job cost $525 in total. No extra diagnosis fee was charged. It took 2 working days, including the final testing. Screen prices depend on the model, and You get the price before any work starts.
For other Mac repairs in the area, see Mac repair Kellyville. See how screen repairs work on the MacBook M1, M2 and M3 screen repairs page, or read a MacBook Pro 14-inch screen job from Bella Vista.
Give me a call or send a few photos of the screen … happy to have a look!!